role_zabbix/templates/zabbix_server.conf.j2

# This is a configuration file for Zabbix server daemon
# To get more information about Zabbix, visit https://www.zabbix.com

############ GENERAL PARAMETERS #################

### Option: ListenPort
#	Listen port for trapper.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# ListenPort=10051

### Option: SourceIP
#	Source IP address for outgoing connections.
#
# Mandatory: no
# Default:
# SourceIP=

### Option: LogType
#	Specifies where log messages are written to:
#		system  - syslog
#		file    - file specified with LogFile parameter
#		console - standard output
#
# Mandatory: no
# Default:
# LogType=file

### Option: LogFile
#	Log file name for LogType 'file' parameter.
#
# Mandatory: yes, if LogType is set to file, otherwise no
# Default:
# LogFile=

LogFile=/var/log/zabbix/zabbix_server.log

### Option: LogFileSize
#	Maximum size of log file in MB.
#	0 - disable automatic log rotation.
#
# Mandatory: no
# Range: 0-1024
# Default:
# LogFileSize=1

LogFileSize=0

### Option: DebugLevel
#	Specifies debug level:
#	0 - basic information about starting and stopping of Zabbix processes
#	1 - critical information
#	2 - error information
#	3 - warnings
#	4 - for debugging (produces lots of information)
#	5 - extended debugging (produces even more information)
#
# Mandatory: no
# Range: 0-5
# Default:
# DebugLevel=3

### Option: PidFile
#	Name of PID file.
#
# Mandatory: no
# Default:
# PidFile=/tmp/zabbix_server.pid

PidFile=/run/zabbix/zabbix_server.pid

### Option: SocketDir
#	IPC socket directory.
#		Directory to store IPC sockets used by internal Zabbix services.
#
# Mandatory: no
# Default:
# SocketDir=/tmp

### NOTE: Support for Oracle DB is deprecated since Zabbix 7.0 and will be removed in future versions.

SocketDir=/run/zabbix

### Option: DBHost
#	Database host name.
#	If set to localhost, socket is used for MySQL.
#	If set to empty string, socket is used for PostgreSQL.
#	If set to empty string, the Net Service Name connection method is used to connect to Oracle database; also see
#	the TNS_ADMIN environment variable to specify the directory where the tnsnames.ora file is located.
#
# Mandatory: no
# Default:
DBHost={{ db_host }}

### Option: DBName
#	Database name.
#	If the Net Service Name connection method is used to connect to Oracle database, specify the service name from
#	the tnsnames.ora file or set to empty string; also see the TWO_TASK environment variable if DBName is set to
#	empty string.
#
# Mandatory: yes
# Default:
# DBName=

DBName={{ db_name }}

### Option: DBSchema
#	Schema name. Used for PostgreSQL.
#
# Mandatory: no
# Default:
# DBSchema=

### Option: DBUser
#	Database user.
#
# Mandatory: no
# Default:
# DBUser=
{% if not ActiveVault %}
DBUser={{ db_user }}
{% endif %}
### Option: DBPassword
#	Database password.
#	Comment this line if no password is used.
#
# Mandatory: no
# Default:
{% if not ActiveVault %}
DBPassword={{ db_passwd }}
{% endif %}
### Option: DBSocket
#	Path to MySQL socket.
#
# Mandatory: no
# Default:
# DBSocket=

### Option: DBPort
#	Database port when not using local socket.
#	If the Net Service Name connection method is used to connect to Oracle database, the port number from the
#	tnsnames.ora file will be used. The port number set here will be ignored.
#
# Mandatory: no
# Range: 1024-65535
# Default for MySQL: 3306
# Default for PostgreSQL: 5432
DBPort= {{ db_port }}

### Option: AllowUnsupportedDBVersions
#	Allow server to work with unsupported database versions.
#       0 - do not allow
#       1 - allow
#
# Mandatory: no
# Default:
# AllowUnsupportedDBVersions=0

### Option: HistoryStorageURL
#	History storage HTTP[S] URL.
#
# Mandatory: no
# Default:
# HistoryStorageURL=

### Option: HistoryStorageTypes
#	Comma separated list of value types to be sent to the history storage.
#
# Mandatory: no
# Default:
# HistoryStorageTypes=uint,dbl,str,log,text

### Option: HistoryStorageDateIndex
#	Enable preprocessing of history values in history storage to store values in different indices based on date.
#	0 - disable
#	1 - enable
#
# Mandatory: no
# Default:
# HistoryStorageDateIndex=0

### Option: ExportDir
#	Directory for real time export of events, history and trends in newline delimited JSON format.
#	If set, enables real time export.
#
# Mandatory: no
# Default:
# ExportDir=

### Option: ExportFileSize
#	Maximum size per export file in bytes.
#	Only used for rotation if ExportDir is set.
#
# Mandatory: no
# Range: 1M-1G
# Default:
# ExportFileSize=1G

### Option: ExportType
#	List of comma delimited types of real time export - allows to control export entities by their
#	type (events, history, trends) individually.
#	Valid only if ExportDir is set.
#
# Mandatory: no
# Default:
# ExportType=events,history,trends

############ ADVANCED PARAMETERS ################

### Option: StartPollers
#	Number of pre-forked instances of pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPollers=5

### Option: StartAgentPollers
#	Number of pre-forked instances of asynchronous Zabbix agent pollers. Also see MaxConcurrentChecksPerPoller.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartAgentPollers=1

### Option: StartHTTPAgentPollers
#	Number of pre-forked instances of asynchronous HTTP agent pollers. Also see MaxConcurrentChecksPerPoller.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartHTTPAgentPollers=1

### Option: StartSNMPPollers
#	Number of pre-forked instances of asynchronous SNMP pollers. Also see MaxConcurrentChecksPerPoller.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartSNMPPollers=1

### Option: MaxConcurrentChecksPerPoller
#	Maximum number of asynchronous checks that can be executed at once by each HTTP agent poller or agent poller.
#
# Mandatory: no
# Range: 1-1000
# Default:
# MaxConcurrentChecksPerPoller=1000

### Option: StartIPMIPollers
#	Number of pre-forked instances of IPMI pollers.
#		The IPMI manager process is automatically started when at least one IPMI poller is started.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartIPMIPollers=0


### Option: StartPreprocessors
#	Number of pre-started instances of preprocessing worker threads should be set to no less than
#	the available CPU core count. More workers should be set if preprocessing is not CPU-bound and has
#	lots of network requests.
# Mandatory: no
# Range: 1-1000
# Default:
# StartPreprocessors=16

### Option: StartConnectors
#	Number of pre-forked instances of connector workers.
#		The connector manager process is automatically started when connector worker is started.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartConnectors=0

### Option: StartPollersUnreachable
#	Number of pre-forked instances of pollers for unreachable hosts (including IPMI and Java).
#	At least one poller for unreachable hosts must be running if regular, IPMI or Java pollers
#	are started.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPollersUnreachable=1

### Option: StartHistoryPollers
#	Number of pre-forked instances of history pollers.
#	Only required for calculated checks.
#	A database connection is required for each history poller instance.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartHistoryPollers=5

### Option: StartTrappers
#	Number of pre-forked instances of trappers.
#	Trappers accept incoming connections from Zabbix sender, active agents and active proxies.
#	At least one trapper process must be running to display server availability and view queue
#	in the frontend.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartTrappers=5

### Option: StartPingers
#	Number of pre-forked instances of ICMP pingers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartPingers=1

### Option: StartDiscoverers
#	Number of pre-started instances of discovery workers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartDiscoverers=5

### Option: StartHTTPPollers
#	Number of pre-forked instances of HTTP pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartHTTPPollers=1

### Option: StartTimers
#	Number of pre-forked instances of timers.
#	Timers process maintenance periods.
#	Only the first timer process handles host maintenance updates. Problem suppression updates are shared
#	between all timers.
#
# Mandatory: no
# Range: 1-1000
# Default:
# StartTimers=1

### Option: StartEscalators
#	Number of pre-forked instances of escalators.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartEscalators=1

### Option: StartAlerters
#	Number of pre-forked instances of alerters.
#	Alerters send the notifications created by action operations.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartAlerters=3

### Option: JavaGateway
#	IP address (or hostname) of Zabbix Java gateway.
#	Only required if Java pollers are started.
#
# Mandatory: no
# Default:
# JavaGateway=

### Option: JavaGatewayPort
#	Port that Zabbix Java gateway listens on.
#
# Mandatory: no
# Range: 1024-32767
# Default:
# JavaGatewayPort=10052

### Option: StartJavaPollers
#	Number of pre-forked instances of Java pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartJavaPollers=0

### Option: StartVMwareCollectors
#	Number of pre-forked vmware collector instances.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartVMwareCollectors=0

### Option: VMwareFrequency
#	How often Zabbix will connect to VMware service to obtain a new data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwareFrequency=60

### Option: VMwarePerfFrequency
#	How often Zabbix will connect to VMware service to obtain performance data.
#
# Mandatory: no
# Range: 10-86400
# Default:
# VMwarePerfFrequency=60

### Option: VMwareCacheSize
#	Size of VMware cache, in bytes.
#	Shared memory size for storing VMware data.
#	Only used if VMware collectors are started.
#
# Mandatory: no
# Range: 256K-2G
# Default:
# VMwareCacheSize=8M

### Option: VMwareTimeout
#	Specifies how many seconds vmware collector waits for response from VMware service.
#
# Mandatory: no
# Range: 1-300
# Default:
# VMwareTimeout=10

### Option: SNMPTrapperFile
#	Temporary file used for passing data from SNMP trap daemon to the server.
#	Must be the same as in zabbix_trap_receiver.pl or SNMPTT configuration file.
#
# Mandatory: no
# Default:
# SNMPTrapperFile=/tmp/zabbix_traps.tmp

SNMPTrapperFile=/var/log/snmptrap/snmptrap.log

### Option: StartSNMPTrapper
#	If 1, SNMP trapper process is started.
#
# Mandatory: no
# Range: 0-1
# Default:
# StartSNMPTrapper=0

### Option: ListenIP
#	List of comma delimited IP addresses that the trapper should listen on.
#	Trapper will listen on all network interfaces if this parameter is missing.
#
# Mandatory: no
# Default:
# ListenIP=0.0.0.0

### Option: HousekeepingFrequency
#	How often Zabbix will perform housekeeping procedure (in hours).
#	Housekeeping is removing outdated information from the database.
#	To prevent Housekeeper from being overloaded, no more than 4 times HousekeepingFrequency
#	hours of outdated information are deleted in one housekeeping cycle, for each item.
#	To lower load on server startup housekeeping is postponed for 30 minutes after server start.
#	With HousekeepingFrequency=0 the housekeeper can be only executed using the runtime control option.
#	In this case the period of outdated information deleted in one housekeeping cycle is 4 times the
#	period since the last housekeeping cycle, but not less than 4 hours and not greater than 4 days.
#
# Mandatory: no
# Range: 0-24
# Default:
# HousekeepingFrequency=1

### Option: MaxHousekeeperDelete
#	The table "housekeeper" contains "tasks" for housekeeping procedure in the format:
#	[housekeeperid], [tablename], [field], [value].
#	No more than 'MaxHousekeeperDelete' rows (corresponding to [tablename], [field], [value])
#	will be deleted per one task in one housekeeping cycle.
#	If set to 0 then no limit is used at all. In this case you must know what you are doing!
#
# Mandatory: no
# Range: 0-1000000
# Default:
# MaxHousekeeperDelete=5000

### Option: CacheSize
#	Size of configuration cache, in bytes.
#	Shared memory size for storing host, item and trigger data.
#
# Mandatory: no
# Range: 128K-64G
# Default:
# CacheSize=32M

### Option: CacheUpdateFrequency
#	How often Zabbix will perform update of configuration cache, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# CacheUpdateFrequency=10

### Option: StartDBSyncers
#	Number of pre-forked instances of DB Syncers.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartDBSyncers=4

### Option: HistoryCacheSize
#	Size of history cache, in bytes.
#	Shared memory size for storing history data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryCacheSize=16M

### Option: HistoryIndexCacheSize
#	Size of history index cache, in bytes.
#	Shared memory size for indexing history cache.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# HistoryIndexCacheSize=4M

### Option: TrendCacheSize
#	Size of trend write cache, in bytes.
#	Shared memory size for storing trends data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# TrendCacheSize=4M

### Option: TrendFunctionCacheSize
#	Size of trend function cache, in bytes.
#	Shared memory size for caching calculated trend function data.
#
# Mandatory: no
# Range: 128K-2G
# Default:
# TrendFunctionCacheSize=4M

### Option: ValueCacheSize
#	Size of history value cache, in bytes.
#	Shared memory size for caching item history data requests.
#	Setting to 0 disables value cache.
#
# Mandatory: no
# Range: 0,128K-64G
# Default:
# ValueCacheSize=8M

### Option: Timeout
#	Specifies how long to wait (in seconds) for establishing connection and exchanging data with Zabbix proxy, agent, web service, and for SNMP checks (except SNMP `walk[OID]` and `get[OID]` items) and `icmpping[*]` item.
#
# Mandatory: no
# Range: 1-30
# Default:
# Timeout=3

Timeout=4

### Option: TrapperTimeout
#	Specifies timeout in seconds for:
#		retrieval of historical data from Zabbix proxy
#		sending configuration data to Zabbix proxy
#		Global script / remote command execution on Zabbix proxy / server
#
# Mandatory: no
# Range: 1-300
# Default:
# TrapperTimeout=300

### Option: UnreachablePeriod
#	After how many seconds of unreachability treat a host as unavailable.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachablePeriod=45

### Option: UnavailableDelay
#	How often host is checked for availability during the unavailability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnavailableDelay=60

### Option: UnreachableDelay
#	How often host is checked for availability during the unreachability period, in seconds.
#
# Mandatory: no
# Range: 1-3600
# Default:
# UnreachableDelay=15

### Option: AlertScriptsPath
#	Full path to location of custom alert scripts.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_server --help".
#
# Mandatory: no
# Default:
# AlertScriptsPath=/usr/lib/zabbix/alertscripts

### Option: ExternalScripts
#	Full path to location of external scripts.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_server --help".
#
# Mandatory: no
# Default:
# ExternalScripts=/usr/lib/zabbix/externalscripts

### Option: FpingLocation
#	Location of fping.
#	Make sure that fping binary has root ownership and SUID flag set.
#
# Mandatory: no
# Default:
# FpingLocation=/usr/sbin/fping

### Option: Fping6Location
#	Location of fping6.
#	Make sure that fping6 binary has root ownership and SUID flag set.
#	Make empty if your fping utility is capable to process IPv6 addresses.
#
# Mandatory: no
# Default:
# Fping6Location=/usr/sbin/fping6

### Option: SSHKeyLocation
#	Location of public and private keys for SSH checks and actions.
#
# Mandatory: no
# Default:
# SSHKeyLocation=

### Option: LogSlowQueries
#	How long a database query may take before being logged (in milliseconds).
#	Only works if DebugLevel set to 3, 4 or 5.
#	0 - don't log slow queries.
#
# Mandatory: no
# Range: 1-3600000
# Default:
# LogSlowQueries=0

LogSlowQueries=3000

### Option: TmpDir
#	Temporary directory.
#
# Mandatory: no
# Default:
# TmpDir=/tmp

### Option: StartProxyPollers
#	Number of pre-forked instances of pollers for passive proxies.
#
# Mandatory: no
# Range: 0-250
# Default:
# StartProxyPollers=1

### Option: ProxyConfigFrequency
#	How often Zabbix Server sends configuration data to a Zabbix Proxy in seconds.
#	This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600*24*7
# Default:
# ProxyConfigFrequency=10

### Option: ProxyDataFrequency
#	How often Zabbix Server requests history data from a Zabbix Proxy in seconds.
#	This parameter is used only for proxies in the passive mode.
#
# Mandatory: no
# Range: 1-3600
# Default:
# ProxyDataFrequency=1

### Option: StartLLDProcessors
#	Number of pre-forked instances of low level discovery processors.
#
# Mandatory: no
# Range: 1-100
# Default:
# StartLLDProcessors=2

### Option: AllowRoot
#	Allow the server to run as 'root'. If disabled and the server is started by 'root', the server
#	will try to switch to the user specified by the User configuration option instead.
#	Has no effect if started under a regular user.
#	0 - do not allow
#	1 - allow
#
# Mandatory: no
# Default:
# AllowRoot=0

### Option: User
#	Drop privileges to a specific, existing user on the system.
#	Only has effect if run as 'root' and AllowRoot is disabled.
#
# Mandatory: no
# Default:
# User=zabbix

### Option: SSLCertLocation
#	Location of SSL client certificates.
#	This parameter is used in web monitoring and for communication with Vault.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_server --help".
#
# Mandatory: no
# Default:
# SSLCertLocation=${datadir}/zabbix/ssl/certs

### Option: SSLKeyLocation
#	Location of private keys for SSL client certificates.
#	This parameter is used in web monitoring and for communication with Vault.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_server --help".
#
# Mandatory: no
# Default:
# SSLKeyLocation=${datadir}/zabbix/ssl/keys

### Option: SSLCALocation
#	Override the location of certificate authority (CA) files for SSL server certificate verification.
#	If not set, system-wide directory will be used.
#	This parameter is used in web monitoring, SMTP authentication, HTTP agent items and for communication with Vault.
#
# Mandatory: no
# Default:
# SSLCALocation=

### Option: StatsAllowedIP
#	List of comma delimited IP addresses, optionally in CIDR notation, or DNS names of external Zabbix instances.
#	Stats request will be accepted only from the addresses listed here. If this parameter is not set no stats requests
#	will be accepted.
#	If IPv6 support is enabled then '127.0.0.1', '::127.0.0.1', '::ffff:127.0.0.1' are treated equally
#	and '::/0' will allow any IPv4 or IPv6 address.
#	'0.0.0.0/0' can be used to allow any IPv4 address.
#	Example: StatsAllowedIP=127.0.0.1,192.168.1.0/24,::1,2001:db8::/32,zabbix.example.com
#
# Mandatory: no
# Default:
# StatsAllowedIP=
StatsAllowedIP=127.0.0.1

####### LOADABLE MODULES #######

### Option: LoadModulePath
#	Full path to location of server modules.
#	Default depends on compilation options.
#	To see the default path run command "zabbix_server --help".
#
# Mandatory: no
# Default:
# LoadModulePath=${libdir}/modules

### Option: LoadModule
#	Module to load at server startup. Modules are used to extend functionality of the server.
#	Formats:
#		LoadModule=<module.so>
#		LoadModule=<path/module.so>
#		LoadModule=</abs_path/module.so>
#	Either the module must be located in directory specified by LoadModulePath or the path must precede the module name.
#	If the preceding path is absolute (starts with '/') then LoadModulePath is ignored.
#	It is allowed to include multiple LoadModule parameters.
#
# Mandatory: no
# Default:
# LoadModule=

####### TLS-RELATED PARAMETERS #######

### Option: TLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for
#	peer certificate verification.
#
# Mandatory: no
# Default:
{% if zabbix_crypt=="tls" %}
TLSCAFile=/etc/zabbix/certs/{{zabbix_ca}}.crt
{% else %}
# TLSCAFile=
{% endif %}

### Option: TLSCRLFile
#	Full pathname of a file containing revoked certificates.
#
# Mandatory: no
# Default:
# TLSCRLFile=

### Option: TLSCertFile
#	Full pathname of a file containing the server certificate or certificate chain.
#
# Mandatory: no
# Default:

{% if zabbix_crypt=="tls" %}
TLSCertFile=/etc/zabbix/certs/{{zabbix_server}}.crt
{% else %}
# TLSCertFile=
{% endif %}
### Option: TLSKeyFile
#	Full pathname of a file containing the server private key.
#
# Mandatory: no
# Default:
{% if zabbix_crypt=="tls" %}
TLSKeyFile=/etc/zabbix/certs/{{zabbix_server}}.key
{% else %}
# TLSKeyFile=
{% endif %}
####### For advanced users - TLS ciphersuite selection criteria #######

### Option: TLSCipherCert13
#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#	Override the default ciphersuite selection criteria for certificate-based encryption.
#
# Mandatory: no
# Default:
# TLSCipherCert13=

### Option: TLSCipherCert
#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#	Override the default ciphersuite selection criteria for certificate-based encryption.
#	Example for GnuTLS:
#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
#	Example for OpenSSL:
#		EECDH+aRSA+AES128:RSA+aRSA+AES128
#
# Mandatory: no
# Default:
# TLSCipherCert=

### Option: TLSCipherPSK13
#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#	Override the default ciphersuite selection criteria for PSK-based encryption.
#	Example:
#		TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
#
# Mandatory: no
# Default:
# TLSCipherPSK13=

### Option: TLSCipherPSK
#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#	Override the default ciphersuite selection criteria for PSK-based encryption.
#	Example for GnuTLS:
#		NONE:+VERS-TLS1.2:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL
#	Example for OpenSSL:
#		kECDHEPSK+AES128:kPSK+AES128
#
# Mandatory: no
# Default:
# TLSCipherPSK=

### Option: TLSCipherAll13
#	Cipher string for OpenSSL 1.1.1 or newer in TLS 1.3.
#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
#	Example:
#		TLS_AES_256_GCM_SHA384:TLS_CHACHA20_POLY1305_SHA256:TLS_AES_128_GCM_SHA256
#
# Mandatory: no
# Default:
# TLSCipherAll13=

### Option: TLSCipherAll
#	GnuTLS priority string or OpenSSL (TLS 1.2) cipher string.
#	Override the default ciphersuite selection criteria for certificate- and PSK-based encryption.
#	Example for GnuTLS:
#		NONE:+VERS-TLS1.2:+ECDHE-RSA:+RSA:+ECDHE-PSK:+PSK:+AES-128-GCM:+AES-128-CBC:+AEAD:+SHA256:+SHA1:+CURVE-ALL:+COMP-NULL:+SIGN-ALL:+CTYPE-X.509
#	Example for OpenSSL:
#		EECDH+aRSA+AES128:RSA+aRSA+AES128:kECDHEPSK+AES128:kPSK+AES128
#
# Mandatory: no
# Default:
# TLSCipherAll=

### Option: DBTLSConnect
#	Setting this option enforces to use TLS connection to database.
#	required    - connect using TLS
#	verify_ca   - connect using TLS and verify certificate
#	verify_full - connect using TLS, verify certificate and verify that database identity specified by DBHost
#	              matches its certificate
#	On MySQL starting from 5.7.11 and PostgreSQL following values are supported: "required", "verify_ca" and
#	"verify_full".
#	On MariaDB starting from version 10.2.6 "required" and "verify_full" values are supported.
#	Default is not to set any option and behavior depends on database configuration
#
# Mandatory: no
# Default:
# DBTLSConnect=

### Option: DBTLSCAFile
#	Full pathname of a file containing the top-level CA(s) certificates for database certificate verification.
#	Supported only for MySQL and PostgreSQL
#
# Mandatory: no
#	(yes, if DBTLSConnect set to one of: verify_ca, verify_full)
# Default:
# DBTLSCAFile=

### Option: DBTLSCertFile
#	Full pathname of file containing Zabbix server certificate for authenticating to database.
#	Supported only for MySQL and PostgreSQL
#
# Mandatory: no
# Default:
# DBTLSCertFile=

### Option: DBTLSKeyFile
#	Full pathname of file containing the private key for authenticating to database.
#	Supported only for MySQL and PostgreSQL
#
# Mandatory: no
# Default:
# DBTLSKeyFile=

### Option: DBTLSCipher
#	The list of encryption ciphers that Zabbix server permits for TLS protocols up through TLSv1.2
#	Supported only for MySQL
#
# Mandatory no
# Default:
# DBTLSCipher=

### Option: DBTLSCipher13
#	The list of encryption ciphersuites that Zabbix server permits for TLSv1.3 protocol
#	Supported only for MySQL, starting from version 8.0.16
#
# Mandatory no
# Default:
# DBTLSCipher13=
{% if Vault is defined %}
### Option: Vault
#	Specifies vault:
#		HashiCorp - HashiCorp KV Secrets Engine - Version 2
#		CyberArk  - CyberArk Central Credential Provider
#
# Mandatory: no
# Default:
Vault={{ Vault }}
{% else %}
# Vault=
{% endif %}
### Option: VaultToken
#	Vault authentication token that should have been generated exclusively for Zabbix server with read only permission
#	to paths specified in Vault macros and read only permission to path specified in optional VaultDBPath
#	configuration parameter.
#	It is an error if VaultToken and VAULT_TOKEN environment variable are defined at the same time.
#
# Mandatory: no
#	(yes, if Vault is explicitly set to HashiCorp)
# Default:
{% if VaultToken is defined %}
VaultToken={{ VaultToken }}
{% else %}
# VaultToken=
{% endif %}

### Option: VaultURL
#	Vault server HTTP[S] URL. System-wide CA certificates directory will be used if SSLCALocation is not specified.
#
# Mandatory: no
# Default:
{% if VaultURL is defined %}
VaultURL={{ VaultURL }}
{% else %}
# VaultURL=
{% endif %}



### Option: VaultPrefix
#	Custom prefix for Vault path or query depending on the Vault.
#	Most suitable defaults will be used if not specified.
#	Note that 'data' is automatically appended after mountpoint for HashiCorp if VaultPrefix is not specified.
#	Example prefix for HashiCorp:
#		/v1/secret/data/zabbix/
#	Example prefix for CyberArk:
#		/AIMWebService/api/Accounts?
# Mandatory: no
# Default:
{% if VaultPrefix is defined %}
VaultPrefix={{ VaultPrefix }}
{% else %}
# VaultPrefix=
{% endif %}
### Option: VaultDBPath
#	Vault path or query depending on the Vault from where credentials for database will be retrieved by keys.
#	Keys used for HashiCorp are 'password' and 'username'.
#		Example path with VaultPrefix=/v1/secret/data/zabbix/:
#		database
#		Example path without VaultPrefix:
#			secret/zabbix/database
#	Keys used for CyberArk are 'Content' and 'UserName'.
#	Example query:
#			AppID=zabbix_server&Query=Safe=passwordSafe;Object=zabbix_server_database
#	This option can only be used if DBUser and DBPassword are not specified.
#
# Mandatory: no
# Default:
{% if VaultDBPath is defined %}
VaultDBPath={{ VaultDBPath }}
{% else %}
# VaultDBPath@=
{% endif %}
### Option: VaultTLSCertFile
#	Name of the SSL certificate file used for client authentication. The certificate file must be in PEM1 format.
#	If the certificate file contains also the private key, leave the SSL key file field empty. The directory
#	containing this file is specified by configuration parameter SSLCertLocation.
#
# Mandatory: no
# Default:
# VaultTLSCertFile=

### Option: VaultTLSKeyFile
#	Name of the SSL private key file used for client authentication. The private key file must be in PEM1 format.
#	The directory containing this file is specified by configuration parameter SSLKeyLocation.
#
# Mandatory: no
# Default:
# VaultTLSKeyFile=

### Option: StartReportWriters
#	Number of pre-forked report writer instances.
#
# Mandatory: no
# Range: 0-100
# Default:
# StartReportWriters=0

### Option: WebServiceURL
#	URL to Zabbix web service, used to perform web related tasks.
#	Example: http://localhost:10053/report
#
# Mandatory: no
# Default:
# WebServiceURL=

### Option: ServiceManagerSyncFrequency
#	How often Zabbix will synchronize configuration of a service manager (in seconds).
#
# Mandatory: no
# Range: 1-3600
# Default:
# ServiceManagerSyncFrequency=60

### Option: ProblemHousekeepingFrequency
#	How often Zabbix will delete problems for deleted triggers (in seconds).
#
# Mandatory: no
# Range: 1-3600
# Default:
# ProblemHousekeepingFrequency=60

## Option: StartODBCPollers
#	Number of pre-forked ODBC poller instances.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartODBCPollers=1

### Option: EnableGlobalScripts
#    Enable global scripts on Zabbix server.
#       0 - disable
#       1 - enable
#
# Mandatory: no
# Default:
# EnableGlobalScripts=1
EnableGlobalScripts=0

# Option: AllowSoftwareUpdateCheck
#       Allow Zabbix UI to receive information about software updates from zabbix.com
#       0 - disable software update checks
#       1 - enable software update checks
#
# Mandatory: no
# Default:
# AllowSoftwareUpdateCheck=1

### Option: SMSDevices
#	List of comma delimited modem files allowed to use Zabbix server
#       SMS sending not possible if this parameter is not set
#	Example: SMSDevices=/dev/ttyUSB0,/dev/ttyUSB1
#
# Mandatory: no
# Default:
# SMSDevices=

####### For advanced users - TCP-related fine-tuning parameters #######

## Option: ListenBacklog
#       The maximum number of pending connections in the queue. This parameter is passed to
#       listen() function as argument 'backlog' (see "man listen").
#
# Mandatory: no
# Range: 0 - INT_MAX (depends on system, too large values may be silently truncated to implementation-specified maximum)
# Default: SOMAXCONN (hard-coded constant, depends on system)
# ListenBacklog=


####### High availability cluster parameters #######

## Option: HANodeName
#	The high availability cluster node name.
#	When empty, server is working in standalone mode; a node with empty name is registered with address for the frontend to connect to.
#
# Mandatory: no
# Default:
{% if ZabbixHA %}
HANodeName={{ inventory_hostname }}
{% else %}
# HANodeName=
{% endif %}
## Option: NodeAddress
#	IP or hostname with optional port to specify how frontend should connect to the server.
#	Format: <address>[:<port>]
#
#	If IP or hostname is not set, then ListenIP value will be used. In case ListenIP is not set, localhost will be used.
#	If port is not set, then ListenPort value will be used. In case ListenPort is not set, 10051 will be used.
#	This option can be overridden by address specified in frontend configuration.
#
# Mandatory: no
# Default:
{% if ZabbixHA %}
NodeAddress={{ ansible_default_ipv4.address }}:10051
{% else %}
# NodeAddress=
{% endif %}
####### Browser monitoring #######

### Option: WebDriverURL
#	WebDriver interface HTTP[S] URL. For example http://localhost:4444 used with Selenium WebDriver standalone server.
#
# Mandatory: no
# Default:
# WebDriverURL=

### Option: StartBrowserPollers
#	Number of pre-forked instances of browser item pollers.
#
# Mandatory: no
# Range: 0-1000
# Default:
# StartBrowserPollers=1

####### Additional configuration files  #######

### Option: Include
#	You may include individual files or all files in a directory in the configuration file.
#	Installing Zabbix will create include directory in /usr/local/etc, unless modified during the compile time.
#
# Mandatory: no
# Default:
# Include=

Include=/etc/zabbix/zabbix_server.d/*.conf

# Include=/usr/local/etc/zabbix_server.general.conf
# Include=/usr/local/etc/zabbix_server.conf.d/
# Include=/usr/local/etc/zabbix_server.conf.d/*.conf